珲春地区高瓦斯矿井煤自然发火标志气体研究

为了探究珲春地区高瓦斯矿井煤自然发火情况，选取该地区板石煤矿22、23a和八连城煤矿18#、26#共4个煤层进行程序升温特性实验，分析了CO及烃类气体产生量随温度的变化规律，优选自然发火标志气体，测算煤自燃临界温度。结果表明，板石22、23a和八连城18#、26#四个煤层的自燃临界温度分别为101.0℃、97.6℃、121.0℃、169.1℃。CO和C2H4的初现温度大约在30℃与80～120℃，且产生量随温度单调递增，可作为煤自燃预测预报的主要参考指标|而同时，为了保证检测的全面与准确，还可以将规律性良好的其他烃类气体、烯烷比和链烷比进行辅助参考。     

Electron Paramagnetic Resonance and Magnetic Circular Dichroism Spectra of the Nitrogenase M Cluster Precursor Suggest Sulfur Migration upon Oxidation: A Proposal for Substrate and Inhibitor Binding

The active site of the nitrogen-fixing enzyme Mo-nitrogenase is the M cluster ([MoFe₇S₉C ⋅ R-homocitrate]), also known as the FeMo cofactor or FeMoco. The biosynthesis of this highly complex metallocluster involves a series of proteins. Among them, NifB, a radical-SAM enzyme, is instrumental in the assembly of the L cluster ([Fe₈S₉C]), a precursor and all-iron core of the M cluster. In the absence of sulfite, NifB assembles a precursor form of the L cluster called the L* cluster ([Fe₈S₈C]), which lacks the final ninth sulfur. EPR and MCD spectroscopies are used to probe the electronic structures of the paramagnetic, oxidized forms of both the L and L* clusters, labeled L^Ox and [ L* ] ^Ox . This study shows that both L^Ox and [ L* ] ^Ox have nearly identical EPR and MCD spectra, thus suggesting that the two clusters have identical structures upon oxidation; in other words, a sulfur migrates away from L^Ox following oxidation, thereby rendering the cluster identical to [ L* ] ^Ox . It is proposed that a similar migration could occur to the M cluster upon oxidation, and that this is an instrumental part of both M cluster formation and nitrogenase substrate/inhibitor binding.     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

一种数字式高温燃油控制阀的特性研究

该文提出了一种数字式高温燃油控制阀,可以实现对高温燃油的连续精确控制。首先,针对高温的恶劣工况,进行了方案设计,包括前置级伺服阀的选用、主阀阀口的设计、整阀的冷却设计,介绍了其结构组成及工作原理;之后分别对高温阀的热特性和控制特性进行了仿真分析,结果表明该方案的高温阀能够满足设计要求。     

Development of a fast atom beam gun for surface-activated bonding

Surface-activated bonding (SAB), also called room-temperature bonding, is used in three-dimensional integration technology for semiconductor devices. An Ar fast atom beam (FAB) is used for SAB. However, conventional FAB guns must be replaced after hundreds of minutes of irradiation because carbon abrasion powders are generated by Ar ions sputtering in the gun. Therefore, this study develops a novel FAB gun with improved lifetime. The proposed FAB gun applies magnetic fields to guide Ar ions to reduce sputtering in the gun and improve irradiation efficiency. The proposed FAB gun indicates the possibility of improving gun lifetime.     

Effect of lanthanum content on the conduction behaviors and relaxation processes of lead lanthanum zirconate titanate antiferroelectric ceramics

(Pb_1-xLa_x) (Zr_0.92Ti_0.08)_1-x/4O₃ (PLZT x/92/8, x = 3, 5 and 7 at%) ceramics with compositions near the antiferroelectric (AFE)-ferroelectric (FE) phase boundary were fabricated by a solid-state reaction method. The effect of lanthanum content on the conduction behaviors and relaxation processes has been investigated. It was verified that the main phase with orthorhombic structure was formed in all compositions. The increase of lanthanum substitution resulted in an enhancement of diffuse phase transition. Impedance analysis suggested that the ac conductivity decreased with increasing lanthanum content. Moreover, thermally stimulated depolarization current study was utilized to establish the correlation between defect structures and relaxation processes. It showed three peaks with distinct characteristics, which originated from dipole orientation, oxygen vacancy migration and phase transition respectively. The oxygen vacancy-related defects induced by lanthanum doping were mainly responsible for the variation of conduction behaviors and relaxation processes.     

一种Chirplet神经网络自动目标识别算法

针对飞机目标的自动识别问题,提出一种联合特征提取与分类的Chirplet神经网络方法,实现一维高分辨率距离像的识别。Chirplet神经网络将Chirplet原子变换用于多层前馈神经网络结构的输入层,替换传统的激励函数对距离像序列进行特征提取;网络的分类部分由隐层和输出层组成。在训练过程中调整神经网络权值的同时,完成对Chirplet原子时频参数的自动调整,协调优化特征参数和分类器参数,使Chirplet神经网络同时实现特征提取和目标分类。对4类飞机目标的仿真测试结果表明,相比时频变换和Gabor原子网络等方法,具有四特征参数的Chirplet神经网络方法具有较高的识别率和抗噪性能。     

碎软煤层条带瓦斯地面高效抽采技术研究

为了提高碎软煤层条带瓦斯抽采效率和效果,基于目前地面瓦斯抽采主要采用垂直井或从式井的方式抽采效果差、效率低的现状,通过理论和实验分析论证了穿岩层压裂改造煤储层的可行性,提出了在目标煤层顶板岩层中钻水平井,并通过垂直向下射孔以及采用泵送桥塞分段进行压裂的方式进行地面瓦斯抽采。试验结果表明:顶板分段压裂水平井单井产量高、高稳产期更长、产量衰减更慢;有效水平井段控制区域内瓦斯下降均匀,更有利于进行条带瓦斯抽采;相同投资条件下,采用水平井的方式瓦斯抽采效率和投入产出比更高。     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。